Fits
RC6 to 36", RC8 and RC10 to 30"
Type
Hex drive pilot
Part number
PH-3
Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
A worn or damaged pilot can make it harder for an auger bit to establish its starting point. The Digga RC6 / RC8 / RC10 Auger Bit Pilot (PH-3) is a replacement wear part identified for Digga RC6, RC8 and RC10 auger bits. Replace the pilot when its condition is affecting setup, and verify the bit model before selecting this part.
Replacement pilot for specified Digga auger bits
This auger bit pilot is intended for the Digga RC6, RC8 and RC10 bit range. Its role is at the point where the bit first meets the ground: a serviceable pilot helps the auger establish its starting point as drilling begins. When the existing pilot is worn or damaged, replacing it may help restore that initial engagement without replacing the entire auger bit.
The PH-3 is a component, not a complete auger bit or auger drive. It is listed as a hex-drive auger bit pilot for the compatible Digga models. Check the identification on your bit and compare the pilot configuration before ordering. Compatibility should not be inferred from a similar-looking bit, another manufacturer’s model, or the fact that an attachment uses an auger.
Why replace a worn pilot?
The pilot contacts the ground at the beginning of a drilling pass, where accurate placement matters for keeping work aligned with the intended hole location. If the pilot is worn, bent, damaged or otherwise no longer seating as expected, the bit may have difficulty getting started. Replacing the wear part can address that specific issue and support routine maintenance of the auger bit.
For construction, landscaping and agricultural work, maintaining the bit’s working components can help keep equipment ready for upcoming digging tasks. Inspect the pilot along with the surrounding bit components, and replace parts that show damage or excessive wear. This is a targeted service part; it does not correct problems caused by an incompatible bit, an unsuitable auger setup, or wear elsewhere in the assembly.
Compatibility and selection
- Part: Digga PH-3 auger bit pilot.
- Identified fit: Digga RC6, RC8 and RC10 auger bits.
- Configuration: Hex-drive pilot, as described for this product.
- Not included: The auger bit, auger drive and other components are not identified as part of this pilot listing.
Before ordering, confirm that your bit is an RC6, RC8 or RC10 model and that the existing pilot configuration matches the PH-3. If your bit’s model marking is missing or unclear, compare the part with the current pilot and consult the bit’s documentation or a qualified equipment parts provider. Do not assume fit based only on the carrier machine or the outside diameter of the auger bit.
Installation and maintenance considerations
Follow Digga’s instructions for inspection and replacement, and use appropriate equipment and safety procedures when servicing an auger attachment. Make sure the machine and attachment are shut down and secured before working on the bit. Inspect the pilot’s seating and adjacent components during service; a replacement pilot should be installed only in the intended compatible configuration.
After installation, check that the pilot is properly retained and that the bit is ready for use according to the manufacturer’s guidance. If the new part does not fit or seat as expected, stop and recheck the model and configuration rather than forcing the component. Correct identification before installation helps avoid delays and unnecessary wear to the pilot or bit.
Part details at a glance
- Product name: RC6 / RC8 / RC10 Auger Bit Pilot - Digga.
- SKU: PH-3.
- Product type: Replacement auger bit pilot / wear part.
- Compatible models identified: Digga RC6, RC8 and RC10 bits.
- Price: $137.99.
This part is intended for buyers maintaining compatible Digga auger bits used with equipment such as skid steers and tractors. The carrier does not determine pilot compatibility; the auger bit model and pilot configuration do. Confirm those details before purchase, particularly when replacing a missing pilot or servicing a bit with an uncertain history.
A practical service part for ongoing auger maintenance
Keeping the correct pilot on hand gives operators a direct replacement option when the original wear part is no longer serviceable. The PH-3 is specifically identified for Digga RC6, RC8 and RC10 auger bits, making model verification the key step in selecting it. For customers sourcing heavy-equipment attachments and parts through eSkidSteer, the product listing provides a focused replacement option; check the listing and your bit documentation for the details needed to confirm fit.
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.