Manual Pivot Angle Broom Attachment for Skid Steer - Digga

📘 Overview

The Digga Manual Pivot Angle Broom provides a cost-effective skid steer sweeping solution where the broom angle is set manually (operator exits to adjust) rather than from the cab. Available in 63""–118"" widths (1600–3000mm). Poly bristle brush. Steel cutting edge. Only requires 1 auxiliary hydraulic circuit (vs 2 for hydraulic pivot). SSQA. Made in Dyersville, Iowa, USA.

⚙️ Key Features

• Manual pivot angle broom | 63""–118"" widths (1600–3000mm)
• Manual angle adjustment — set angle before session or between passes
• Poly bristle brush | Steel cutting edge
• Requires only 1 auxiliary hydraulic circuit
• Lower cost than hydraulic pivot version
• SSQA | Skid steers, front end loaders, telehandlers
• Made in Dyersville, Iowa, USA

🔑 Benefits

• Single aux circuit requirement suits machines that do not have a second aux circuit for hydraulic pivot
• Lower cost for jobs where angle changes are infrequent — if sweeping at one consistent angle per session, manual pivot avoids the cost premium of hydraulic pivot
• Poly brush and steel cutting edge provide the same sweeping performance as hydraulic version
• Multiple widths cover small to very large sweep area requirements

📊 Specifications

🔗 Attachment Compatibility

SSQA. Requires 1 auxiliary hydraulic circuit for brush motor only. Angle set manually. Single aux circuit suitable machines are eligible for this model.

🚜 Machine Compatibility

Compatible with skid steer loaders with Universal Quick Attach (SSQA):

1 aux circuit required. Manual angle — set before use.

❓ FAQs

📥 Downloads

• Download Spec Sheet / Product Brochure (PDF)