Heaped Capacity
0.8 – 2 cu yd
Width
60 – 95"
Models available
11 variants
Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
🏭Made in USA since 1981
🔒5-year factory guarantee
🔨Fully welded heavy-gauge steel
📘 Overview
The Star Industries telehandler bucket turns an extendable-reach forklift into a loader, reaching over walls and into elevated positions a wheel loader cannot get to. As a telehandler bucket attachment it is offered in two mounting styles and three widths: the Quick-Tach forklift bucket models (1460, 1472, 1496) attach directly to the boom, and the slip-on forklift bucket models (1400B, 1406B, 1408B) slide onto forks you already own. Widths are 60, 72 and 95 inches, with heaped capacity from 0.8 to 2.0 cubic yards depending on model and back height. Hi-Back and high capacity forklift bucket versions add volume without adding width.
⚙ Key Features of the Star Industries Telehandler Bucket
- Quick-Tach models 1460 (60"), 1472 (72") and 1496 (95") mount straight to the telehandler boom
- Slip-on-the-forks models 1400B (60"), 1406B (72") and 1408B (95") fit standard 48" forks
- Hi-Back models 1460HB, 1472HB and 1496HB raise capacity at the same bucket width
- Hi-Capacity models 1496HC and 1408BHC carry a full 2.0 cu yd
- Removing the forks and carriage saves 700 to 1,000 lb of dead weight on Quick-Tach models
- Slip-on models accept forks up to 7" wide by 2.5" thick by 48" long
- Positive locking system plus chain and grab hook around the carriage as a secondary restraint
- Extra-deep shell, approximately 51" front to back, for irregular loads
- Optional 5/8" x 8" double-bevel bolt-on blade extends bucket life up to three times
- Fully welded seams, heavy-gauge steel, 5-year factory guarantee, made in the USA since 1981
- Ships as a complete forklift bucket attachment — no machine modification needed on slip-on models
🔑 Why Buyers Choose the Star Industries Telehandler Bucket
- Quick-Tach mounting returns 700 to 1,000 lb to your load chart — the forks and carriage come off the machine entirely, so the weight you were carrying as hardware becomes payload you can lift at reach.
- Slip-on models need no change to the machine at all — the bucket slides onto the 48" forks already fitted and pins behind the heel, so the forks stay on and can be back in service in a minute.
- Hi-Back adds volume without adding width — the 1472HB carries 1.25 cu yd in the same 72" width as the 1472 at 1.0 cu yd, which matters when a doorway or aisle sets your width limit.
- The bolt-on blade is replaceable, the bucket lip is not — a 5/8" x 8" double-bevel blade takes the wear and unbolts when spent, extending bucket life up to three times in abrasive material.
- Approximately 51" of depth handles loads a shallow bucket spills — masonry rubble, root balls and awkward pallet remains ride inside the shell instead of over the lip.
📊 Star Industries Telehandler Bucket Specifications
| Model | Mount | Width | Heaped Capacity |
|---|---|---|---|
| 1460 | Quick-Tach | 60" | 0.80 cu yd |
| 1460HB | Quick-Tach, Hi-Back | 60" | 1.00 cu yd |
| 1472 | Quick-Tach | 72" | 1.00 cu yd |
| 1472HB | Quick-Tach, Hi-Back | 72" | 1.25 cu yd |
| 1496 | Quick-Tach | 95" | 1.25 cu yd |
| 1496HB | Quick-Tach, Hi-Back | 95" | 1.65 cu yd |
| 1496HC | Quick-Tach, Hi-Capacity | 95" | 2.00 cu yd |
| 1400B | Slip-on-the-forks | 60" | 1.00 cu yd |
| 1406B | Slip-on-the-forks | 72" | 1.20 cu yd |
| 1408B | Slip-on-the-forks | 95" | 1.60 cu yd |
| 1408BHC | Slip-on, Hi-Capacity | 95" | 2.00 cu yd |
📋 Forklift Bucket Options at Checkout
| Option as shown at checkout | What you get |
|---|---|
| 60" QT Forklift Bucket | 1460 — 60 in Quick-Tach, 0.80 cu yd, mounts direct to the boom coupler |
| 72" QT Forklift Bucket | 1472 — 72 in Quick-Tach, 1.00 cu yd |
| 95" QT Forklift Bucket | 1496 — 95 in Quick-Tach, 1.25 cu yd |
| 60" QT Forklift Bucket - Hi-Back | 1460HB — 60 in Quick-Tach Hi-Back, 1.00 cu yd; for Gehl Dynacarrier, JCB Q-Fit and Pettibone couplers |
| 72" QT Forklift Bucket - Hi-Back | 1472HB — 72 in Quick-Tach Hi-Back, 1.25 cu yd |
| 95" QT Forklift Bucket - Hi-Back | 1496HB — 95 in Quick-Tach Hi-Back, 1.65 cu yd |
| 95" QT Forklift Bucket - Hi-Capacity | 1496HC — 95 in Quick-Tach Hi-Capacity, 2.0 cu yd |
| 95" Hi-Cap. Forklift Bucket (for 48" L Forks Only) | 1408BHC — 95 in slip-on Hi-Capacity, 2.00 cu yd, for 48 in long forks |
| 60" Forklift Bucket (for 48" L Forks Only) | 1400B — 60 in slip-on-the-forks, 1.00 cu yd, for 48 in long forks |
| 72" Forklift Bucket (for 48" L Forks Only) | 1406B — 72 in slip-on-the-forks, 1.20 cu yd, for 48 in long forks |
| 95" Forklift Bucket (for 48" L Forks Only) | 1408B — 95 in slip-on-the-forks, 1.60 cu yd, for 48 in long forks |
🔗 What Ships With the Telehandler Bucket, and What You Can Add
Every Star Industries telehandler bucket arrives ready to work: the shell, the mount for the style you chose, and on slip-on models the positive locking system with its chain and grab hook. Nothing further is required to put the bucket to work. Two things are worth adding. A bolt-on blade takes the wear the bucket lip would otherwise absorb and is ordered by width — BOB60, BOB72 or BOB95 — each a 5/8" x 8" double-bevel blade supplied with fasteners. Slip-on models also need a fork retaining pin behind the heel of each fork, which many machines already carry. The bucket itself is covered by the 5-year factory guarantee that backs every Star telehandler attachment.
🚜 Which Telehandlers and Forklifts Fit This Bucket?
Slip-on-the-forks models fit any make and model of extendable-reach forklift running standard 48" long forks — Skytrak, Lull, JLG, Caterpillar, Genie, Terex, Gradall, JCB, Gehl, Skyjack, Ingersoll-Rand and Xtreme machines all qualify, because the bucket mounts to the forks rather than to the machine. Fork pockets accept forks up to 7" wide by 2.5" thick. Quick-Tach models mount straight to the boom coupler and are built to your specific machine, so every major telehandler brand is covered — give the make, model and year at checkout and the correct coupler is fitted. Gehl Dynacarrier, JCB Q-Fit and Pettibone machines are supported by the Hi-Back and Hi-Capacity models, which is the range to choose from for those couplers.
| Your machine | Bucket to choose |
|---|---|
| Skytrak, Lull, JLG, Cat, Genie, Terex, Gradall, JCB, Gehl, Skyjack, Ingersoll-Rand, Xtreme — with 48" forks | Any slip-on model: 1400B (60"), 1406B (72"), 1408B or 1408BHC (95") |
| Any telehandler with a boom quick-tach coupler | Any Quick-Tach model: 1460, 1472, 1496 and the HB and HC versions. Give make, model and year at checkout. |
| Gehl Dynacarrier, JCB Q-Fit, Pettibone couplers | Hi-Back or Hi-Capacity: 1460HB, 1472HB, 1496HB or 1496HC |
| Machines running forks wider than 7" or thicker than 2.5" | Quick-Tach models, which mount to the boom instead of the forks |
❓ Star Industries Telehandler Bucket Questions, Answered
What is the difference between Quick-Tach and slip-on-the-forks telehandler buckets?
Quick-Tach telehandler buckets attach directly to the boom with the forks and carriage removed, which returns 700 to 1,000 lb to the machine load chart. Slip-on-the-forks buckets slide onto forks already on the machine and pin behind the heel, so nothing is removed and the forks stay available for the next task. Quick-Tach suits machines that run a bucket most of the day; slip-on suits mixed work.
Which telehandler bucket width should I choose?
The Star Industries telehandler bucket comes in 60, 72 and 95 inch widths. Match the width to the narrowest gate, aisle or doorway on the job rather than to the machine, then use back height for volume. A 72" Hi-Back 1472HB carries 1.25 cu yd, the same as a standard-back 1496 at 95", in 23 fewer inches of width.
What is the difference between Hi-Back and Hi-Capacity buckets?
Hi-Back models (1460HB, 1472HB, 1496HB) raise the rear wall to increase heaped capacity at the same bucket width. Hi-Capacity models (1496HC and the slip-on 1408BHC) go further, reaching a full 2.0 cu yd at 95". Hi-Back and Hi-Capacity are also the only options that fit Gehl Dynacarrier, JCB Q-Fit and Pettibone quick-tach machines.
Do I need a Hi-Back bucket for a JCB or Gehl telehandler?
Yes. Gehl Dynacarrier, JCB Q-Fit and Pettibone quick-tach designs require a Hi-Back or Hi-Capacity bucket; a standard-back Quick-Tach bucket will not mount. Select a 1460HB, 1472HB, 1496HB or 1496HC for those machines.
What size forks do the slip-on telehandler buckets fit?
Slip-on models 1400B, 1406B, 1408B and 1408BHC accept forks up to 7 inches wide and 2.5 inches thick, and are designed for standard 48-inch long forks. A retaining pin must be installed behind the heel of each fork and the supplied chain wrapped around the carriage before lifting.
Is a bolt-on blade included with the telehandler bucket?
No, the bolt-on blade is ordered separately by width: BOB60, BOB72 or BOB95. Each is a 5/8 inch by 8 inch double-bevel blade supplied with fasteners, and can extend bucket life up to three times in abrasive material. Add the blade to your cart alongside the bucket.
How much can the Star Industries telehandler bucket carry?
Heaped capacity runs from 0.80 cu yd on the 60" 1460 to 2.00 cu yd on the 95" 1496HC and 1408BHC. The published figure is bucket volume only — the safe load is set by your telehandler load chart at the reach and height you are working at, not by the bucket.
How is shipping calculated on a telehandler bucket?
Shipping is calculated at checkout. Add the bucket to your cart and enter your delivery address, and the freight charge is shown before you complete the order. Lift gate service is available for residential deliveries and can be selected at checkout.
Which telehandler bucket carries the most?
The 2.00 cu yd models: the 95 inch Quick-Tach 1496HC, and the slip-on 1408BHC for machines keeping their forks. Both are Hi-Capacity builds, and the 1496HC is also one of the models that fits Gehl Dynacarrier, JCB Q-Fit and Pettibone couplers.
How do I order the right Quick-Tach bucket for my machine?
Add the bucket to your cart on eskidsteer.com and complete checkout online. Quick-Tach buckets are built to the machine, so enter your forklift make, model and year on the order page and eskidsteer confirms the coupler before the order is built.
📥 Star Industries Telehandler Bucket Downloads
🎥 Video
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.