Hydraulics required
None
Blades
Dual blade configuration
Series
E-Series (Economy)
Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
🏭Made in USA
🔒3-year warranty
📘 Overview
This Roadrunner skid steer box grader is the Economy Series (E-Series): the same dual-blade, side-panel box design as the C-Series, without hydraulics, at the lowest price in the Roadrunner grader range. Material is caught between the front and rear blades and held inside tall side walls, so loose stone is carried forward and released into low spots — the reason a skid steer box blade of this design fills potholes, removes washboarding and leaves a finished surface on a gravel road in one or two passes rather than an afternoon of chasing ruts. It is shorter than the C-Series at 60" long, which is why it turns tightly in yards, around buildings and in confined lots. You make one choice: blade width — 72", 84" or 96" — and it should be wider than your machine so the tires or tracks stay on ground the grader has already smoothed. Every size ships on a Universal Skid Steer Quick Attach plate, needs no auxiliary hydraulic circuit at all, and carries Roadrunner's 36-month warranty. It is welded and powder coated in Lancaster County, Pennsylvania.
⚙ How the E-Series Box Blade Is Built
- Dual blade configuration with side pans — two cutting blades and enclosed sides give the box its carrying action, so material is moved into low spots instead of pushed aside.
- Large side walls to limit windrows — the taller pans keep loose stone inside the grading area, which is why the E-Series leaves a clean edge rather than a berm along the shoulder.
- Replaceable AR400 wear shoes — hardened skid bars carry the box and set the cut; they are the sacrificial component and bolt off for replacement.
- Heavy-duty square tube frame — Roadrunner uses thicker, high-strength steel than typical imported economy box blades.
- Two-stage zinc primer with powder coat — not spray paint. This is the finish difference that shows up after two seasons of wet stone and road salt.
- No hydraulics to plumb — the E-Series runs on machines with no auxiliary circuit, and there are no hoses, couplers or cylinders to leak or service.
- Compact 60" length — half a foot shorter than the C-Series graders, which is what makes it manoeuvrable in tight corners and small lots.
- 6" blade height, 10-degree blade angle — Roadrunner's published blade geometry, shared with the C-Series.
🔑 Where the E-Series Earns Its Price
- Lowest cost of entry in the Roadrunner skid steer grader range — the E-Series gives you the box geometry, the AR400 wear shoes and the American build without paying for hydraulic depth control you may never use on a short private drive.
- Fits machines that have no auxiliary hydraulics — nothing is plumbed in, so an older or base-spec skid steer runs it exactly as well as a new one.
- Fewer passes on loose material — as a gravel road grader the enclosed box carries soft, freshly tipped stone and spreads it smooth, rather than bulldozing it into a heap ahead of the blade.
- Turns where a longer grader cannot — at 60" long it works around buildings, in yards and on short lots that a 66" C-Series grader has to shuffle in.
- Wear parts are consumables, not repairs — the AR400 skid bars are designed to be worn out and swapped, so a season of hard gravel work costs a set of wear shoes rather than a frame.
📊 Roadrunner E-Series Box Grader Specifications
| Specification | Value |
|---|---|
| Product type | Dual-blade economy box grader / box blade |
| Series | E-Series (Economy) |
| Depth adjustment | Fixed — no hydraulic depth control |
| Hydraulics required | None |
| Blades | Dual blade configuration with side pans |
| Side walls | Large, to limit windrows |
| Blade height | 6" |
| Blade angle | 10 degrees |
| Skid bars | Replaceable AR400 hardened wear shoes |
| Frame | Heavy-duty square tube, high-strength steel |
| Finish | Two-stage zinc primer with powder coat |
| Mounting | Universal Skid Steer Quick Attach |
| Country of origin | Made in USA — Lancaster County, Pennsylvania |
| Warranty | 36 months against defects in workmanship and materials |
🔄 E-Series Sizes Side by Side
| Model | 72" E-Series | 84" E-Series | 96" E-Series |
|---|---|---|---|
| Blade width | 72" (6 ft) | 84" (7 ft) | 96" (8 ft) |
| Overall width | 76" | 88" | 100" |
| Overall length | 60" | 60" | 60" |
| Overall height | 20" | 20" | 20" |
| SKU | 72" E-Series | 84" E-Series | 96" E-Series |
Overall width is 4" greater than the nominal blade width on every size, because the side pans sit outboard of the cutting edges.
📋 Choosing an E-Series Width
Blade width is the only choice on the E-Series — there are no hydraulic, cutting edge or mount options, because every unit ships fixed-depth on a Universal Skid Steer Quick Attach plate. Pick the width that clears your machine: the 72" model measures 76" overall and suits compact skid steers and compact track loaders; the 84" measures 88" and is the common choice for mid-size machines maintaining a long gravel drive; the 96" measures 100" and belongs on a full-size loader with the traction to pull a full box of stone. If you want depth control from the cab or a three-point tractor mount instead, those are C-Series features — the hydraulic CH Series and the manual CJ Series both offer them.
🚜 Which Machines Fit the E-Series Box Grader?
Compatible with skid steer loaders and compact track loaders equipped with a Universal Quick Attach (SSQA) system, including:
BobcatCaterpillarJohn DeereCaseNew HollandTakeuchiKubotaGehl
The E-Series needs no auxiliary hydraulic circuit, no electrical connection and no case drain — it mounts on the quick attach plate and works. Roadrunner does not publish a horsepower or lift capacity limit for the E-Series, so size it by width against your machine: a common sizing rule among grader dealers is to choose an overall width at least 12" greater than the machine's tire or track width. Compatibility is determined by mount type, not brand — confirm your machine's quick attach configuration before ordering. Everything needed to confirm fitment is on this page — add the grader to your cart to see delivered pricing for your address.
Before you sign for delivery: inspect the crate and the grader with the driver and note any damage on the Bill of Lading before signing. A signed clean Bill of Lading makes a freight damage claim very difficult to win. Photograph anything that looks wrong and email the photos to support@eskidsteer.com.
❓ E-Series Box Grader Questions, Answered
What is the difference between the E-Series and the C-Series graders?
The Roadrunner E-Series is the economy box grader: fixed depth, no hydraulics, skid steer quick attach only, and a shorter 60" frame. The C-Series adds depth adjustment — manual T-handle screw adjusters on the CJ Series, or a cab-controlled hydraulic cylinder on the CH Series — plus independent left-right control for cutting a road crown, a serrated cutting edge option, a bolster wheel kit and a Category 1 & 2 three-point mount. If you only need to smooth and maintain a gravel surface, the E-Series does that job.
Does the E-Series box grader need auxiliary hydraulics?
No. The Roadrunner E-Series has no cylinders, hoses or couplers and requires no auxiliary hydraulic circuit on the machine. It mounts on the Universal Skid Steer Quick Attach plate and is ready to work, which makes it a straightforward fit for older or base-specification skid steers.
Which E-Series width should I buy?
Choose the E-Series width that is wider than your machine so the tires or tracks run on ground the grader has already finished: the 72" model is 76" overall, the 84" is 88" and the 96" is 100". A common sizing rule among grader dealers is to allow at least 12" more overall width than the machine's tire or track width. Wider blades also demand more traction, so the 96" suits a full-size loader.
Is this the right skid steer attachment for gravel driveway maintenance?
For routine work, yes — a box grader for skid steer use is the tool that resurfaces a drive rather than just pushing material off it. The Roadrunner E-Series cuts the high spots, carries that material inside its side pans and releases it into the low spots, so one or two passes leave a graded surface. If you also need to cut a crown so water sheds to both shoulders, that requires independent left-right depth control, which is a C-Series feature rather than an E-Series one.
Will this driveway grader fix a washboarded gravel drive?
Yes — that is the job it is designed around. The E-Series traps material between two blades and its side pans, cuts the ridges off the washboard, carries that material forward and drops it into the troughs. Roadrunner's own description names pothole filling, washboard removal and spreading loose material in minimal passes as the E-Series use case. Pack the surface afterwards, or the ripples return.
Can I fit the E-Series to a tractor three-point hitch?
No. The E-Series is supplied on a Universal Skid Steer Quick Attach plate only, and no three-point option is offered for it. Roadrunner's Category 1 & 2 three-point attachment kit is a C-Series accessory, so a tractor buyer should look at the manual CJ Series or the hydraulic CH Series, both of which offer a three-point mount or the Combo that carries both interfaces.
Are the wear parts on the E-Series replaceable?
Yes. The E-Series runs replaceable AR400 hardened wear shoes, which are the sacrificial parts that carry the box and set the cut height. They bolt off and are replaced as consumables, so the powder-coated square tube frame outlasts several sets.
What does the Roadrunner warranty cover on the E-Series?
Roadrunner Equipment warrants the E-Series against defects in workmanship or materials for 36 months from the date of sale, lease or rental. Normal wear items are excluded, which for this grader means the cutting edges and the AR400 skid shoes. Damage from misuse, improper setup or unapproved modification is also outside the warranty.
How does the E-Series ship, and what should I check on delivery?
Shipping is calculated at checkout — add the grader to your cart, enter your delivery address, and the freight charge is shown before you complete the order. Roadrunner graders ship LTL freight on a pallet because of their width and weight, and lift gate service can be selected at checkout for residential deliveries without a loading dock.
🎥 See the E-Series Box Grader Working
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.