78" Land Plane Attachment | Bradco By Paladin - TEST

🏗️ Product Overview

The Haugen Industrial Work Platform is an American-made aerial work platform (man basket) engineered specifically for telehandlers and vertical mast forklifts. Every platform is built to meet and exceed ANSI/OSHA B56.6-2021 and CSA B335-04 safety standards — and Haugen's owner has been part of the OSHA committee, meaning compliance isn't a checkbox: it's baked into the design.

Available in four platform sizes — 4'×4', 4'×6', 4'×8', and 4'×9'8"" — each rated at 1,000 lbs capacity, these work platforms collapse flat for fast tool-free assembly and transport. Standard platforms ship with industrial fork pockets (2.75""×7.75"" tine fitment). Upgrade options include Large Pockets for oversized forks (3.50""×9.50"") and a 60"" High Back Railing required for vertical mast forklift use.

⚙️ Key Features

• ANSI/OSHA B56.6-2021 and CSA B335-04 certified — engineer-certified compliance keeps you violation-free on every OSHA inspection; the only work platform designed by someone on the OSHA committee
• Collapsible sides — no tools required — all four sides fold down completely for compact shipping and storage; platform assembles and disassembles in minutes without tools
• Heavy-duty steel mesh floor — open mesh construction provides underfoot grip, visual feedback, and drainage while supporting years of heavy use
• Spring-loaded, self-latching, self-closing doors — industrial-strength spring hinges keep doors rigid and closed under all conditions; doors cannot be accidentally left open
• Safety restraint tie-downs standard — built-in anchor points on all platforms give workers a safe connection point for safety harnesses
• Cable-attached safety pins on all side rails — each pin is tethered to the platform by a cable so pins cannot be lost on the job site
• Heavy-duty fork pins (chained to platform) — secure the platform to your fork tines from above, preventing platform movement during lifting; standard fork pockets fit tines up to 2.75""×7.75""
• Right-hand transport pockets standard (all models except MWP 4×4) — built-in pockets on the right side of the platform allow safe loading and unloading for transport between job sites
• Removable front panel — allows loading materials directly onto the platform floor without lifting over the railing
• On-board operator's manual in weatherproof tube — always accessible at the platform for operator reference in the field
• Made in USA — 100% American manufactured at Haugen's facility, 877-580-6218

✅ Why Choose the Haugen Work Platform

• Stay OSHA-compliant without guesswork. Haugen's owner sits on the OSHA committee — these platforms are engineered by the people who write the standards, not reverse-engineered from them. If OSHA inspects your site, the Haugen platform keeps you clean.
• Your telehandler becomes an aerial platform without renting a lift. Instead of renting a boom lift or scissor lift for elevated tasks, a Haugen work platform converts the telehandler already on your site into a compliant personnel lift — eliminating a separate rental cost for every elevated work task.
• No tools. No lost parts. No assembly time wasted. Collapsible sides collapse and deploy in minutes without tools. Cable-attached safety pins and fork pins mean nothing falls off or gets left behind. The on-board manual means operators always have the reference they need.
• Four platform sizes means the right footprint for every job. The 4'×4' is the compact choice for single-operator tasks in tight spaces. The 4'×9'8"" provides nearly 10 feet of working length for two operators tackling wide overhead work — one platform family covers every application.
• American manufacturing means lead times and support you can count on. Haugen builds every platform in the USA. Parts availability, warranty service, and product support aren't dependent on an overseas supply chain.

📐 Technical Specifications

Source: Haugen Attachments Official Spec Sheet (haugen-work_platform_2018.pdf) and manufacturer product page (haugenattachments.com). Standards compliance updated to ANSI/OSHA B56.6-2021 per current manufacturer page.

📊 Variant Configuration Guide

Select the platform size for your application, then choose your fork pocket type and railing height.

Pocket Selection: Industrial Pockets (standard) fit fork tines up to 2.75""×7.75"". Choose Large Pockets if your telehandler's forks are 3.50""×9.50"" or larger.

High Back Selection: The 60"" High Back Railing is required for vertical mast forklift applications. For standard telehandler use, standard railing height is sufficient unless your application requires additional fall protection height.

🚜 Machine Compatibility

The Haugen Work Platform is designed to fit most telehandlers via fork pockets that slide over the machine's fork tines and are then secured with heavy-duty fork pins chained to the platform. Standard pockets fit tines up to 2.75"" × 7.75"" at a 30"" spacing. Large Pocket option accommodates 3.50"" × 9.50"" tines.

Compatible machine types include:

• Telehandlers (boom handlers) — JLG, Genie, Skyjack, Manitou, JCB, Merlo, Gradall, and others
• Vertical mast forklifts (High Back Railing required)
• Industrial forklifts with ITA-style fork carriages

Always verify that the telehandler's rated lift capacity equals or exceeds the combined weight of the work platform plus all occupants and tools before use. Never exceed the 1,000 lb platform capacity rating.

❓ Frequently Asked Questions

📄 Downloads & Resources

• Download Product Spec Sheet — Haugen Work Platforms (PDF)
• Download Operator's Manual — Haugen Work Platform 2018 (PDF)

🎬 Product Video

Watch the Haugen Work Platform in Action on YouTube